Project of The Week - Card Holder!

Hi Everyone, below is a super simple, extremely beautiful card hold I made, and yes those are my Christmas cards I made and have already mailed :) It's the only thing that i am ahead of schedule on!

What I have done is taken some Jenni Bowlin chipboad stars, and I have glittered one using the Tim Holtz glossy accents as an adhesive, spray adhesive would also work well, and then I used the same adhesive to glue down paper on the smaller star. The glossy accents is amazing, I use it for almost everything - including gluing my shoes back together!



Next I looped a ribbon for the 'hangger' part of the card holder, and cut a long strip for the bottom to clip the cards on. Thats it! Cute eh?






As for my cards: joy stamp is a font from October Afternoon, snowflake is Maya road, bling is doodlebug, tuelle is Bazzill, papers are both KI.


Cheers, have a great week!

Techneek of the Week - Build A Page

This week I'm showcasing, from start to finish, a simple way to complete a layout using a "divide and conquer" approach!

Sometimes even I get stuck when I start a layout. And this is a super easy way to kickstart your creativitiy even when you're not feeling it! All you have to do is visually divide your layout into smaller sections making a little grid on your page. Then add your basic elements, like your photos and pattern paper, and lastly you go in with your embellishments and title to finish the page! This method can be used over and over again, and no one will ever notice! And you can embellish as much or as little as you like, so it suits every type of scrapbooker!

You will need:

Solid and pattern paper to suit your photos - grab lots and we'll whittle it down to the ones that fit and match best.

A pencil and eraser - to mark where your papers and photos will end up

Embellishments and sticker letters - or whatever you want to use to embellish your finished layout

If you're really finicky about measuring and whatnot, grab a nice ruler and your trimmer. I do everything by sight, and cut with my aweseome big orange Fiskars scissors.

Repositionable adhesive

Step One:

Pick your background paper. I'm doing a 9x9 layout, so I cut down a 12x12 sheet of new Autumn Leaves paper. You can do this technique on a rectangle as well, so those 8.5 x 11 scrappers out there!

Next, decide where your photos are going to go. This will help determine the rest of your grid's shape and size. I'm using two 4x6 photos, but I layered the horizontal picture over top of the vertical one. If you decide you need to crop your photos, don't do it yet!! Wait until you decide the final position of all your elements before you start cutting anything!!

Use your pencil to mark the background paper where the edges of your photos will sit. If you're really worried about things moving around while your trying to work, use repositionable adhesive to stick things down before you have to really stick them down!!

(Sorry about the crooked photos...Blogger!!!)


Step Two: I pulled together all the potential pattern papers from my stash that I might want to use. This is also a great technique to help use up your scraps! We're not going to use all of these patterns (I'm not that crazy!!), but it helps to keep your options open.

Step Three: Try picking a couple of patterns from your giant stack and cutting them down to fit in the grid pattern. I grabbed a little scrap of October Afternoon lined paper, and turquoise flocked Doodlebug and cut them into smaller strips to fill the space beside the horizontal photo. A DreamStreet journaling tag fills the larger space and will work great when I get around to putting journaling on the page.

If the first couple of papers don't work for you, try some others. If you're doing a larger layout, you might need bigger scraps than I used. Or you can use more. Once you have them in a position that you like, mark their edges onto the background paper (or stick them down with temporary adhesive)

Step Three: To make your grid look less like a grid, add some scallops or swirls to break up the harsh lines of the grid. The lined paper I used accentuates the linear aspeact of the layout, so I really needed to add some "rounder" elements, for lack of a better word!!

I grabbed some more paper out of my stash that was already scalloped for me. The new Sassafraslass papers come with a super neat-o patterned border.

Techneek Within a Techneek!!!

So I thought I would share a mini-techneek in here with you! Here's a how-to on creating your very own scallop-edged border.

Grab your favourite corner rounder punch, doesn't matter what size (I'm using medium) and pull the guard off. That's the extra green plastic piece that sits around the edge anbd guides your paper in. Don't worry...you'll be able to put it back on again!!

Starting at the left end of your paper, line the bottom edge of the paper up with the flat edge in your punch. Now punch the paper. Then move the punch to the right so the very tip of the curved part of the punch is even with the last scallop you punched. Then punch again.

Keep doing this all down your paper to get a nice scalloped edge.I didn't end up using this little scalloped piece in my finished layout, but it's still a good technique to know!!

Continued...Once you have the basic pattern paper and photos in place to complete your grid, glue them down for good! Remember that you have marks on your background paper to line everything up again.

And now you can embellish the layout. I used a curved banner right in the middle of the layout, right in the middle of the grid, to add some dimension and break up the harsh lines of the paper. The Prima flowers and paper heart add more curvy lines and act as focal points that guide your eye around the layout. I added my title to the outside of the grid so I could still use the lined paper for my journaling.




There aren't a lot of embellishments on the layout, but the ones that are there add both to the theme of the photos, and add some depth and texture to the grid.

____________________________________________

Now how about that contest...

I've got some sweet Riff Raff Designs chipboard from the October release, as well as the big swirl, some fab fall American Crafts ribbon, Prima fall leaves, and lots of buttons!

There's also a little "runners up" prize, because we here at TM like to spread the love!!

I'll announce the winners next Thursday. All you need to do to win is leave a comment below with your favourite product/technique and you have a chance to get your hands on these sweet prizes!!

And check back because I'm going to feature some of the other TM girl's artwork and their "signature moves" i.e. the techneeks and products they love!

Project of The Week!

I apologize for the delay, I was a little wrapped up in my homework and completely forgot and am not nearly as smart as Lisa to pre-do my posts. So here we go...

Below are some basic white candles and i have taken some of my favorite scrapbooking supplies and turned them into elegant centerpieces. For each candle I cut two strips of paper and centered one in the other and then decorated.



.

Snowflakes are Heidi Swapp, paper is SEI and GCD studios, Bling is doodlebug, chipboard is Maya Road, Joy bling is Me and My Big Ideas.

Cheers.

Techneek of the Week - Sparkly Snowflakes

Tis the season, eh? For snow on the ground, and winter sports starting up, and more time indoors for scrapbooking!!

I was inspired by the lovely snowfall we had in Edmonton the other day...which is now pretty much gone because the temperature shot right back up! So I didn't even get a picture of the first snow of the year...but I'm makingup for it with these gorgeous SPARKLY SNOWFLAKES!

I'm showcasing a number of techniques in this post to turn your acrylic or chipboard snowflakes into fabulous embellishments that will go great on all those winter layouts I'm planning...once we actually get "real" snow!!


NOTE: Blogger is up to its old tricks and is flipping some of my photos. It shouldn't effect the "lesson" learned here today, but it is a little bit annoying!!

_____________________________________

First Techneek - Juli's Technique ala Lisa
You will need:

Chipboard snowflake - I'm using the new Riff Raff Designs

Ranger Perfect Pearls in the Pearl colour

Pearl alcohol ink

Glossy accents

Fluffy paintbrush

Step One: Working on a small area at a time, cover the shape in alcohol ink. Then quickly sprinkle the Perfect Pearls over the still wet alcohol ink using your fluffy paintbrush.
Step Two: Keep applying the alcohol ink and then the Perfect Pearls until you have covered the entire shape. Now we wait until it dries.

Step Three: Once it is dry, cover the entire shape with a nice thick coat of glossy accents. Now we wait until that dries, which will take at least an hour.

Pictured below:

The top snowflake has alcohol ink and Perfect Pearls, but no glossy accents. This is a very nice, subtle shimmery look. The bottom snowflake is coated in glossy accents that are still drying. And I am a goober and didn't take a picture of the finished product! Doy! Check out this post on my personal blog for an example in colour!

_______________________________________

Second Techneek - Super Glitter

You will need:

Glitter - I used Doodlebug white and some old silver stuff we had lying around

Acrylic/plastic snowflakes - I'm using Maya Road

Glossy accents

Step One: Cover the shape with glossy accents. If you don't mind getting messy, it's really easy to just squirt a big glob of glossy accents on the shape and smear is around with your fingers. That way you get a nice smooth, thin coverage.

This is what it will look like all covered with glossy accents. NOW, you could stop here and you would have a nice shiny snowflake, but today we're going for SPARKLY, so...

Step Two: Sprinkle the white Doodlebug glitter all over the shape. Try not to just dump it on because you'll just end up with a big glob of glitter!


Step Three: Before I tapped off the excess white glitter, I added some silver around the edges. This just gives it a little more dimension, more interest!

Step Four: Tap off the excess glitter and let the whole thing dry fully!

Pictured below: The finished product! See how the silver glitter gives a nice subtle contrast and adds some depth!

______________________________________

Techneek #3 - Champagne Wishes

You will need:

Acrylic/plastic snowflake shape (2)

Ranger Alcohol Ink in two shades of blue - I used Stream and Stonewash

blue Ice Stickles - I used these instead of regular Stickles because it gives a more subtle sparkle, but you should use whatever kind you have on hand!

Sparkly embossing powder - I used Whispers brand Holographic powder

Clear Embossing ink pad

Heat emboss gun

PROTECT YOUR WORK SURFACE AND YOUR CLOTHES! We are using alcohol ink, which stains!

Now I'm calling this techneek "Champagne Wishes" because we're using alcohol ink and sparkles. I know...I'm so clever! And I'm using alcohol ink as the base for two different techniques, so watch for the change-up!

Step One: Choose your first colour of ink (here it's Stream, but it doesn't actually matter what you start with!). Drop some ink onto your shape and smear it around, either by rotating the shape, or using your fingers if you don't mind getting messy!Keep applying ink and smearing it around until your entire shape is covered. Now set this one aside to dry and grab the second snowflake and the second colour of alcohol ink.

Apply the next colour of alcohol ink to the next snowflake the same way you did with the first one. Let them both dry.

Pictured Below: the dry alcohol ink.

Using Embossing Powder

Step One: Press your snowflake into the clear embossing ink (or press the ink pad into the shape, your choice!) making sure the ink covers the entire surface.

Step Two: Sprinkle the sparkly embossing powder all over the shape.
Step Three: Tap off the excess powder.

Step Four: Heat emboss. Now remember, and this is important, your heat gun will melt the plastic and make it curvy, especially if you leave the heat on it for too long. Keep the gun moving, and once you see the embossing powder setting don't go back over that spot! Let it sit for a moment once your done before picking it up, as it will be super hot!!

And I can't figure out why I didn't post pictures of the finished snowflakes...and now I'm at work so I can't check to see if I even TOOK this picture!! Trust me that they look totally cool and sparkly!!

On the second blue snowflake I smeared the Ice Stickles all over. Keep in mind that Stickles WILL NOT STICK TO ACRYLIC SHAPES on it's own. It will just flake right off once it has dried. So I applied the alcohol ink as a base, and am hoping that this solves that problem! I'll let you know tomorrow!!

________________________________________

Techneek the Fourth - The Home Stretch!

You will need:

Chipboard snowflake

Ranger Liquid Pearls - I think I used the Pearl colour...exciting, I know! But there's a nice silver and light blue that would look great on a snowflake as well!

Step One: Apply Liquid Pearls all over the surface of your snowflake.

Now, unless you spread it with a different tool (like your fingers or a popsicle stick or something) it's going to look bumpy-lumpy. I think it justs adds some nice, unique texture to the snowflake. If you want it to be smooth you will just have to smooth it with your fingers or popsicle stick or something else!

I'll try and post some completed projects tomorrow, using my new sparkly snowflakes!! I must say that I had a tonne of fun making these little guys! And now I have a nice little stack of embellishments ready for future scrapbooking!!

______________________________________

Now you'll want to check back next week, like for sure, as I'm doing a special post featuring the favourite techneeks of the rest of the Treasured Memories "Design Team"...and I'll be doing a little giveaway! WOOT! Free Stuff!!

Christmas Trees!

These are very simple beautiful little trees to make.
Supplies: paper squares cut to 2' x 2', styrofoam cone, stick pins




All you have to do is take the 2 x2 squares and pin them in the bottom left corner to the cone. You want to start at the base of the cone and keep going up. You could also finish these delightful trees with a star or a cheap mini tree star from the dollar store.

Thanks for stopping by!

APOLOGIES

To those ladies who asked for the printable instructions for the Prima Mini Build-A-Book. They were ready and raring to go over a week ago, but gmail wasn't cooperating, so I couldn't send them. And then I got sick and have been avoiding the computer for the last week and consequently FORGOT about the saved email sitting in my drafts folder! When I get home from work today I PROMISE to send this email. And for anyone else who wants to get in on the action, please let me know this afternoon if you want the instructions as well, and I will get them out to you by tonight...barring any further "Server errors".

Thanks again for your patience. I swear, if my head wasn't firmly attached to my body...well, you know!!

Techneek of the Week...Sick Day

So I'm calling in sick. No Techneek this Week. Sorry!

Stop by tomorrow...Juli has another awesome project to show you!!